Tag Archives: Nokia

Dawn Richard and Nokia

A about a month ago I got to film American Artist, Dawn Richard on behalf of Angelic films and 1000 Heads for Nokia. Dawn had a very limited slot in her schedule to to shoot an interview on why she switched to the Nokia Lumia 920. The shoot took place after a photo shoot at a studio on the banks of the Thames in Woolwich, London.

Sound was recored by my good friend and sound guru Haresh Patel as I shot on my Canon 5D mk2 using tree lenses, 24-70 F2.8, 70-200 F4 IS and my 17-40 F4 wor the wide shots. Lighting wise, we lit Dawn using a Kino Diva as a key light and then used a set of four Dedo’s for fill, backlight and to light the wall behind her. Over all we had just over ninety minutes to set up, and shoot. Amy Coop of Angelic films edited the footage at her office at Pinewood Studios using Final Cut.

Social Media Week 2012

Just over a month ago it was Social Media Week. SMW spans the globe with events in all over the word including London and L.A. As part of this Angelic Films was asked by 1000 Heads to record several events in  London and and L.A for key supporter, Nokia. I shot in London while Shane Daley shot in L.A. Both of us shooting using Canon 5D kits with dual system sound. As ever these events are full of people wanting to share and exchange knowledge  and well worth going to if you get the opportunity next year.

Nokia Gift Machine at Cafe 1001, Shoreditch

A couple of weeks I edited the above video for Angelic Films about Nokia’s Gift Machine which they installed in Cafe 1001, Shoreditch, London. The Gift machine as more stamps in its passport than I do, being that it’s been to Spain the U.A.E and many other places. Created by 1001 Heads, the Nokia Gift Machine links up with Foursquare allowing people to win free stuff when they check into the gift machine where ever it is in the world and you don’t have to me a Nokia user to do it. The film was shot using a Canon 5d mk2 and edited on FCP7.

Nokia Lumia and the Steadicam Smoothee

Last year I worked on a project with Angelic Films for Nokia converting some Steadicam Smoothee’s for the Nokia N8. See here for details. Time has progressed in the mobile word and Nokia have now released the Lumia 800 into the world and again come back to us to see if we could again adapt the Steadicam Smoothie for their new phone. The phone’s camera is head and shouldered above Nokias previous N8 it terms of quality, ease of use and control. If I wasn’t so wedded into the Apple ecosystem this is the phone I would choose right now.

The Lumia 800 has a slightly larger form factor that the N8 but after testing it we found that it still fitsthe Quick Release Stedicam Smoothee Mount for iPhone 3GS, which was also the mount we previously modified for the Nokia N8. There was however on additional modification we had to make, milling down the top clip so it didn’t rest on one of the buttons.

We did this using a Dremel with a barrel sanding attachment. Without this modification the clip presses the button stopping the camera working and potentially turns the phone off as well. The sander actually heats up the plastic whilst it spins sometimes leaving a melted area on the edge which can easily removed by snapping it on once cold. When milling out the recess for the button it is important to have the Smoothie mounting plate does not move. I found the simplest way was to use my tripod as the Smoothie mounting plate actually has a 1/4 inch threaded hole in it’s base precisely to do this.

Next we created the aperture for the camera to look though. The Lunia unlike the N8 is flat which is a great thing for your pocket but also means that the camera lens sits a few mm’s back from front plate of that of the Smoothee mount. This means the hole needs to be slightly bigger that that of the previous N8 Modification. Drilling though the actual mount requires care because it is a sandwich of plastic and metal, the metal being in the middle. We found the best way was to first of all drill a small pilot hole using a 4mm HSS drill bit then using a 13mm HSS drill bit in a drill press. It is important the drill bits are sharp or the friction created with actually cause so much heat it will melt the plastic.  This won’t actuallybe big enough but it is the most efficient way of  doing it cheaply. To keep the metal heating up too much I spayed it with water whilst drilling.

The Steadicam mount is quite tricky to hold securely because of it’s shape and because it, being made mostly of plastic it flexes under presure. To get around these issues I used an old cork sanding block and cut a section out so the mount would grip around it. This solved the shape problem. to solve the flexing problem I added a small bit of MDF on top of the sanding block

This meant The mount could be clamped down securely onto the drill press.

Once the 13mm hole had been been drilled out it was time to move onto enlarging the hole. Initially we used the Dremel with metal cutting bit this is very quick and efficient but doesn’t always leave the prettiest of finishes. So to finish of the camera aperture I used a Rucko HSS step drill bit. As the hole needed to be approximately 18mm in diameter the step drill is ideal. The only minor problem using the step drill I used was that the actual steps were not deep enough as the Steadicam mount is about 5mm thick and the steps on the drill 4mm. Not insurmountable but worth being taking into consideration as it means tuning the mount over briefly to drill out the extra 1mm from the mount. All that was need next was a small bit of filing, a quick wash under the tap to get rid of any metal dust, and a permanent black marker pen to colour in the exposed metal. The reason for this is not just because it makes it look pretty but it also stops the metal reflecting light into the lens, preventing ugly flares which would spoil all the hard work. Job done!

 

 

Nokia Maps 3D – The Mapstronaut

Another thing I had a little part in the filming of this video for Nokia demonstrating the power of their 3D Maps. I filmed most of the London footage again working for Angelic Films. Shot on my Canon 5D using and Canon EF 24-70mm L F2.8 and 70-200mm L4 lenses. More about Nokia Maps can be found here

 

Nokia Products That Changed the World: Stephen White

A couple of months whilst working for Angelic Films I shot and edited a short interview with Stephen White from Nokia about a recent exhibition: Nokia Products That Changed the World at the London Design Museum. The interview was included on the Nokia Connect website and accompanied a extensive article about the exhibition. the Video was shot using a Canon 5D and 24-70mm L F2.8 lens